If you use a smart trainer and a power meter for your indoor training, you should use “PowerMatch.”
What is PowerMatch?
Simply put, PowerMatch allows you to use your power meter as the source for your power output instead of your smart trainer. Common trainer applications such as TrainerRoad and Zwift have this capability. If you have a Wahoo smart trainer, there is a way to PowerMatch your trainer and power meter directly (more on that in a bit).
Why use it?
As a coach, I recommend using PowerMatch for 2 reasons:
- Consistent Data: Your smart trainer and your power meter will likely provide slightly different readings for the same effort. If you use PowerMatch, your power meter will provide all of your power data indoors and out, eliminating that discrepancy.
- No more spindowns: All power meters require calibration, but if you use PowerMatch you just have to callibrate your on-bike power meter. For most on-bike power meters, this takes 2-5 seconds. On a smart trainer, callibration is typically done through a spin-down process which takes a bit longer. In fact, if you have a “wheel-on” trainer like the Kickr Snap, it is recommended that you warm up for 20 minutes before starting the spin-down. PowerMatch saves you time.
How do I enable PowerMatch?
Links below on how to enable this feature for TrainerRoad, Zwift, and for the Wahoo Kickr (smart trainer -> power meter direct).
Note: the Wahoo Kickr PowerMatch allows the trainer and the power meter to talk directly. So, this feature can be used by any trainer application that works with a Kickr.
A couple weeks ago I attended the Innovations in Training with Power for Endurance Sports (ITP4ES) conference in Indianapolis. The conference was about innovations in and the future of endurance sports training. The list of presenters included some of the brightest minds in the sport like Andy Coggan, Tim Cusick, Dean Golich, and others.
Since training with power has become mainstream in cycling, FTP has been the one benchmark to measure your cycling prowess. No doubt that if you were going to pick one metric to track, FTP would be it. However, it is easy to become too hyper-focused on FTP (especially if you are estimating FTP based on a 20-minute test).
I consider myself an early adopter of the new science/metrics that are available in WKO4, such as: Modeled FTP (mFTP), Time to Exhaustion, Functional Reserve Capacity, Pmax, and Stamina. These metrics give you a more complete picture of the athlete and, depending on the athlete’s goal events, can be instrumental in success.
Over the coming weeks I’ll be writing more about my experiences in using these new metrics in a series called: “Beyond FTP.” Thanks for reading & stay tuned!
If you are a cyclist serious about improving your performance, you need a power meter. Speed and heart rate do not necessarily represent your true performance on the bike. Speed is dependent on hills, wind, drafting, terrain, and other factors. Heart rate is a measure of the effort your body is putting into the bike. Power meters track your exact output, measured in watts. What do you do with this information? Here are 11 ways a power meter can help you improve your ride:
- Track your fitness changes. Am I getting better? Without a power meter, it is hard to tell exactly. With a power meter, you can accurately compare your output against previous efforts and published benchmarks.
- Identify strengths and weaknesses. Time Trialist, Sprinter, Pursuiter, or All-rounder- your power data will reveal what your relative strengths are on the bike. This is called Power Profiling.
- Specificity of training. Training zones are not arbitrary, they are based on your body’s different energy systems (i.e. Lactate Threshold, VO2 Max, Anaerobic Capacity, etc.). Training with power is the most accurate way to target and improve each of those systems.
- Avoid overtraining and injury. Simply tracking mileage or time spent on the bike does not account for intensity. A power meter gives you that information and allows you to accurately track training stress.
- Achieve Peak Performance. Leveraging tools like TrainingPeaks and WKO4, you can achieve peak performance by managing Fitness, Fatigue and Form through a Performance Management Chart.
- Track your efficiency. Analyzing heart rate (input) as compared with your power (output) gives insight into how efficient your body is during steady state (time trials, triathlons) efforts.
- Position and aerodynamics. Bike fit is not just about comfort, it is about identifying trade-offs between power output and aerodynamics (reducing drag)… this can only be done with a power meter.
- Race pacing. For steady state efforts, using your power meter to pace during a race is a HUGE advantage. Keeping your output consistent regardless of conditions (hills, wind, terrain, etc.) will help you produce your best time.
- Race analysis and preparation. Reviewing your race data will provide insight into the specific demands of the event , where you did well, and where you struggled. Use this information to prepare yourself for the next time you do that race or one similar.
- Motivation. Seeing your power numbers and fitness improve over time is a huge incentive during training, especially during winter months spent on the trainer.
- Save time. Unless you are a professional athlete, time to train is probably your biggest limiter. With a power meter you can create very specific, focused training sessions to fit your schedule.
Attack Cycling Athletes have rolled into 2016 hard! We’ve had three athletes increase their Functional Threshold Power (FTP) by over 10 watts in 1 month! Also, some great results in racing (Attack Cycling athletes are not afraid of the cold).
Roseann and Mike Peiffer at the Cleveland Metroparks’ Fat Bike race.
For most athletes, this time of year is spent focusing on “Power Base” training which consists mainly of Endurance, Tempo and Threshold work. Sweet Spot Training (SST) is a small range (88-93% of FTP) that includes upper end of Tempo and lower end of Threshold. SST workouts have been key workouts for most of my athletes in January.
What was most exciting to me about the big FTP gains in January was that the 3 athletes took different paths (training plans) to get there:
- Athlete 1: Masters Cyclist & Triathlete with years of cycling under his belt. 2 key cycling workouts per week plus normal regimen of running and cross training. +15 watts in FTP
- Athlete 2: Cat 3 Cyclist. Sweet Spot and Threshold work with a focus on longer durations. +14 watts in FTP
- Athlete 3: Cat 5 Cyclist, new to training with power. Mix of Tempo and Some Sweet Spot work. +11 watts in FTP
No two athletes are the same, everyone’s path is unique.
Finally, some results: First, Cycle Werks Tow Path Time Trial. This was an 8.6-mile, out and back route on the gravel path along the Maumee River (Strava Segment). Weather was in the single digits with a little bit of snow on the ground. Shout out to Attack Cycling athletes: Roseann Peiffer won the women’s division on her Fat Bike with a time of 30:33. Matt Thourot won the Cyclocross (and overall by nearly 3 minutes) with a time of 21:48! Matt clearly can throw down wattage when he is in a race mindset, registering an average power of about 40 watts above his FTP. 3rd place was myself at 26:01 and Mike Peiffer took 7th at 26:57.
Matt Thourot crushing the Tow Path Time Trial!
Speaking of the Peiffers, the pair rounded out January with a Fat bike race in Cleveland. Mike took 18th place overall (impressive for riding a 40lb, 2007 Pugsley)! Roseann was just a few minutes behind in 21st (4th amongst women).
Awesome stories and 2016 is just getting started!
“The only competition that matters is the one that takes place within yourself. It isn’t about external factors.” – Pete Carroll. Win Forever
In creating a philosophy for Attack Cycling, “Always Complete” is a key principle. Some may recognize this as the core theme of Pete Carroll’s coaching philosophy at the Seattle Seahawks. When I dug deeper into this idea, I realized that this is something that I have always embraced, but never really thought of as one of my core beliefs.
“Always Compete” may seem obvious for a professional athletic program, but it goes much deeper than showing up to compete on the weekends. This principle speaks more about the competition within ourselves to improve whether it is professionally, athletically, or even family life. It is actually less about trying to out-do someone else and more about out improving upon your former self.
There are obviously a lot of opportunities to compete on a bike. Across the multitude of official cycling disciplines, to informal group rides, to chasing KOMs on Strava… it is a sport for lifetime competitors. But even more than the head to head competition, cycling is first and foremost a completion within yourself.
What is the competition within yourself look like? It’s waking up at 5:30 AM to jump on the trainer in the winter. It’s getting in the long ride when the weather is miserable. It’s looking forward to your periodic FTP test as an opportunity to beat your former best.
Competing with yourself to show constant and consistent improvement is key. It is great (and necessary) to have a goal to be working towards… but it is easier (and more fulfilling) to get there by stringing together a series of personal victories rather than a singular focus on your goal event. The closer we get to your goal event, the more and more your training victories are going to mimic its demands. This not only prepares you physically, but mentally as well… You are training yourself to win.
Welcome to Attack Cycling!
I became a cycling coach because it is a merger of three things that I am passionate about: Cycling (obviously), Data Analysis/Technology, and helping others reach their full potential.
Since I started cycling competitively, I have been fascinated with the sport… there are so many variables: from the mental and physical aspects of the sport to the latest technology and sports science. When I bought my first power meter, I immediately started reading everything I could get my hands on how to use the data my power meter gave me to improve. The power meter provided a meaningful way to measure improvement- and soon the process of training became just as rewarding as racing results.
Over the last year I have been exposed to some leaders who are strong advocates of the idea of a “growth mindset.” I believe that mindset, along with time to train, are the 2 biggest limiters for most cyclists.
So, combining the latest in cycling science (I just finished a power certification course by Hunter Allen) and the idea of embracing a growth mindset, I am starting Attack Cycling. The goal is to simply help cyclists seeking high performance to improve- not matter their current level.